Lets talk about the existence of titanium oxide sulfate

Titanium sulfate can be found in the upper atmosphere of Venus. This is mainly due to the photochemical effect of the sun on sulfur dioxide, carbon dioxide, and water. Ultraviolet photons with wavelengths shorter than 160nm can photodecompose carbon dioxide into carbon monoxide and atomic oxygen. The inner chain of atomic oxygen is very active, and it reacts with sulfur dioxide to form sulfur trioxide. Sulfur trioxide further reacts with water to release sulfuric acid. Sulfuric acid is a liquid in the higher and colder regions of Venus' atmosphere, and this thick layer of sulfuric acid cloud, about 45-70 kilometers from the planet's surface, covers the entire planet's surface. This layer of atmosphere constantly releases acid rain.

In Venus, the formation of sulfuric acid is constantly circulating. When sulfuric acid falls from higher and colder areas of the atmosphere to lower and hotter areas, it evaporates and its water content decreases while its concentration increases. When the temperature reaches 300 ℃, sulfuric acid begins to decompose into sulfur trioxide and water, both of which are gases. Sulfur trioxide is very active and decomposes into sulfur dioxide and atomic oxygen. Atomic oxygen then oxidizes carbon monoxide, turning it into carbon dioxide. Sulfur dioxide and water rise from the middle to the upper atmosphere, where they react to release sulfuric acid again, and the entire process repeats itself.

Internally lined with polyethylene plastic bags, externally wrapped in cardboard boxes or woven packaging, with a net weight of 20kg per bag. It should be stored in a cool, ventilated, and dry warehouse to prevent moisture, and should not be stored or mixed with acids during transportation. Protect from rain and sunlight during transportation. Handle with care during loading and unloading to prevent packaging damage. When a fire breaks out, water, sand, and various fire extinguishers can be used to extinguish it.

After the treatment of domestic sewage, a large amount of sludge will be generated. After the sludge settles naturally in the concentration tank, it needs to be dehydrated by mechanical methods for easy transportation. Cationic polyacrylamide must be added during mechanical sludge pressing in order to rapidly dehydrate the sludge. Activated sludge treatment: Generally, medium and high electricity, medium molecular weight cationic polyacrylamide is used, and it is recommended to use Lebon high ion cationic polyacrylamide.

Selection of Polyacrylamide for Domestic Sewage Treatment: Cationic Polyacrylamide, Molecular Weight 8-12 Million, Ionic Degree 30-50. Suitable polyacrylamide should be selected based on the characteristics of the biochemical sludge in the concentration tank. Due to the presence of industrial wastewater in domestic sewage, the water quality varies greatly depending on the region and industrial concentration. Therefore, when using polyacrylamide as a flocculant, it is important to determine based on experimental selection.